Difference between revisions of "Creating Project Views from Server Resident Project Plans for OnePager Pro Add-in for Version 6.0"

Revision as of 14:56, 7 April 2017

Overview

The OnePager Pro (OPP) Add-in operates the same in all modes (i.e., NEW, UPDATE, and OP) when source plans are accessed from Microsoft Project Server, Project Online, and SharePoint accounts as when source plan data is resident on your computer.

When you intend to use Microsoft Project source plans that are resident in the cloud along with OPP Add-in, we recommend that you access your source plans using Microsoft Project Professional rather than through OPP Add-in. By so doing, OPP Add-in supports your project view creation and opening needs as if your source plans are resident on your computer.

However, when you intend to use OPP Add-in in the UPDATE mode with source plans accessed from the cloud through Microsoft Project Professional, there is an additional step in the UPDATE process that needs to be performed.

General Caution

1) Both OPP Add-in supports accessing your cloud resident files without the assistance of Microsoft Project Professional. Additionally, OPP Add-in can create, update, and open multi-project project views from source packages consisting of more than one Microsoft Project source plan. See the article at: Creating Various Multi-Project Views with OnePager Pro and Express (Portal) 8.0.1-60.

2) However, due to technical differences between Microsoft Project source plans resident on your computer and those that are cloud resident (i.e., Microsoft Project Server, Project Online, and SharePoint), it is NOT possible to mix source plans from different media (i.e., your computer and the cloud).

3) As a protection, OPP Add-in prohibit, to the extent possible, the combination of source plans from differing media from being incorporated into a single source package for the purpose of creating a NEW project view or for UPDATING an existing project view.

4) Please keep this caution in mind when constructing source packages for OPP Add-in.

About Using Server Resident Project Source Plans and OnePager Pro Add-in

1) Our recommendation is to use Microsoft Project Professional to connect, access, and verify your access to your Microsoft Project Server, Project Online, or SharePoint account when you intend to use OPP Add-in to create a NEW project view, UPDATE an existing project, or OPEN an existing project view.

2) As mentioned in the portal article at Creating Project Views from Server Resident Project Plans for OnePager Pro (Portal) 8.5.1-60, OPP Add-in operates in the NEW and OPEN mode the same for source plans accessed from the cloud as when source plans are resident on your computer.

3) It is only in the UPDATE mode that OPP Add-in requires that you perform one extra step in the normal UPDATE mode process. This extra step is discussed in the sub-section below:

Using Microsoft Project Professional with Cloud Resident Source Plans for Project View UPDATE

1) We assume for this sub-section that you are experienced with accessing your Microsoft Project Professional source plans from the cloud.

2) Accordingly, we assume that the steps involved are documented elsewhere and includes any access security procedures needed to access your source plans residing in the cloud.

3) The high level steps are as follows:

a) Make sure to close any and all instances of OnePager Pro that might be running outside of Microsoft Project (i.e., OnePager Pro Desktop).

b) Launch Microsoft Project Professional from your desktop.

c) Use Microsoft Project Professional to access your Microsoft Project Server, Project Online, or SharePoint account.

d) Open the required Microsoft Project Server source plan from your desktop Microsoft Project Professional application.

e) Next, go to the Microsoft Project Professional Add-ins tab on the tool bar and click the OnePager icon.

f) Once the OnePager Pro Start form appears click the OPEN button. Do Not Attempt to Do An UPDATE At This Point.

g) Now, go to the OPP Home tab and click the Project-View Properties (PVP) button and then click on the Advanced tab in the left margin of the PVP form as shown below:

h) Change the Server Method setting in the PVP form’s Advanced tab to the Use MS Project Professional setting. This tells OPP Add-in to let Microsoft Project Professional load your source plan. Finally, click Apply and OK button as shown below:

i) When the PVP form closes, go to the Data tab on the OPP Add-in ribbon and proceed with the UPDATE process as you would normally.

j) See the article at this link for more details on the Pull Update Operation: Using the OnePager "Data" Tab's "Selected file(s)" Button

k) This completed the UPDATE mode process using OPP Add-in with a cloud resident source plan.

Using Microsoft Project Professional with Cloud Resident Source Plans to Create a NEW Project View

1) We assume for this sub-section that you are experienced with accessing your Microsoft Project Professional source plans from the cloud.

2) Accordingly, we assume that the steps involved are documented elsewhere and includes any access security procedures needed to access your source plans residing in the cloud.

3) The steps are as follows:

a) Make sure to close any and all instances of OnePager Pro that might be running outside of Microsoft Project (i.e., OnePager Pro Desktop).

b) Launch Microsoft Project Professional from your desktop.

c) Go to the Microsoft Project Professional Add-ins tab on the tool bar and click the Templates icon. This brings up the current Template.

d) Next, go to the Template form's Advanced tab and check to make sure that the Server method window is displaying the Use MS Project Professional. If not, change this setting to Use MS Project Professional as shown below:

e) If the change is made click the Save and use to close the Template form.

f) Now, you can use Microsoft Project Professional to access your Microsoft Project Server, Project Online, or SharePoint account.

g) Open the required Microsoft Project Server source plan from your desktop Microsoft Project Professional application.

h) Next, go to the Microsoft Project Professional Add-ins tab on the tool bar and click the OnePager icon.

i) Once the OnePager Pro Start form appears click the NEW button.

j) From this point on the process for creating a NEW project view follows the standard workflow.

Using OnePager Pro Add-in to Access Cloud Resident Source Plans to Create a NEW Project View

1) As we mentioned in the subsection above ( About Using Server Resident Project Source Plans and OnePager Pro Add-in), we recommended that you use Microsoft Project Professional to connect, access, and validate your access to your cloud resident source plans.

2) You can still use OnePager Pro Add-in for this purpose but the access procedure requires that you first launch Microsoft Project Professional and load some source plan before launching OPP Add-in. This is required because OPP Add-in if launched from Microsoft Project Professional where there is a blank source plan brings up the OnePager Start form with the NEW and UPDATE buttons ghosted as shown below:

3) To avoid this, we recommend that you simply launch Microsoft Project Professional with any source plan resident on your computer for convenience.

4) Doing this allows you to use the OnePager Start form's NEW button to access your cloud resident source plans as follows:

a) After launching Microsoft Project Professional with some source plan from your local computer, click the Template... button on the Microsoft Project Professional tool bar's Add-ins tab.

i) This brings up the OPP Add-in current Template previously shown in a sub-section above.

ii) What you need to do is verify or change the Server method in the Advanced tab of the current Template so that the option selected is Connect directly to server as shown below:

iii) When this setting is selected, click the Save and use button at the bottom of the Template form.

b) After closing the current Template form, click the OnePager icon on the Microsoft Project Professional tool bar, and click the NEW button on the OnePager Start form. You will be presented with the OnePager choices (OPC) form as shown here:

c) Next, you need to access your cloud source plan using OPP Add-in by clicking the Add/Remove on the OPC form. Click the Add/Remove button to display the Data source selection form shown below:

d) The next step is to remove this temporary source plan and go through the procedure to connect to your cloud resident source plans.

e) To remove the temporary source plan, select it with a click in its row of the Data source selection form and then click the Remove button. The Data source selection form will then look like this:

f) Next, click the Add button in the Data source selection form which will bring up the options as follows:

g) Making the selection above will bring up the Choose what to import form as shown below:

h) Next, click the Connect button in the Choose what to import form, select the source plan from the list that appears and then click OK as shown here:

i) Clicking the OK' button in the above step will update the Data source selection form to display your cloud resident source plan as shown below:

i) Finally, click OK on the Data source selection form and OPP Add-in will update the top of the OPC form to reflect the new cloud resident source plan selected. The OPC form now looks like this after the project view name and the flag selections are made:

j) By clicking the Create new project view button in the OPC form above OPP Add-in will pull in the cloud resident source plan and create the desired project view that will look like this:

Troubleshooting

Please refer to these two Frequently Asked Questions if you are having problems:

Updating OnePager with a Project Online/Project Server 2016 plan

Can't Connect to Project Online/Project Server 2016 to Update a OnePager Report

Related Links

Using Enterprise Custom Fields from Microsoft Project for OnePager Pro 24.3.1-60

Creating a NEW Project View - OnePager Pro Add-in

Creating Another New Project View - OnePager Pro Add-in

Opening an EXISTING Project View - OnePager Pro Add-in

ADDING a Snapshot via Push Update - OnePager Pro Add-in

REPLACING a Snapshot via Push Update - OnePager Pro Add-in

(8.5.1.1-60)